Tag Archives: Stratocaster

The Red Strat Specs

So, I have made up my mind, and here are the specs for the guitar

  • Seymour Duncan Antiquity Texas Hot Vintage Set
  • Fender Stratocaster White SSS pickguard and knobs
  • Fender 5 Way pickup selector
  • CTS 250K linear potentiometers
  • Sprague Orange Drop 0.022uf capacitor
  • 2 DPDT on-on mini-toggle
  • Fender Staggered Locking tuners
  • Graph Tech Black Tusq XL
  • Gotoh NS510TS Bridge

All components are already on the guitar or have been ordered.

Oh, I have also ordered a cheap chinese 1Ply pickguard. The idea is to use it as a testing for ageing. I’ll be using shoe shine to do this. if it works and looks good then I’ll apply the same method on the pickguard. It is funny though, I have a 30 year old guitar, and the pickguard still looks white…. has lots of scratches, but still white.

 

Here we go again…

Aside from the black partscaster, I also have another MIM blacktop stratocaster. This is a Candy apple red.

I’ve already did some work on it when I got it in March this year (2017). I replaced the  nut (Graph Tech Black Tusq XL), bridge saddles (Gotho Stainles Steel) and Fender Locking Tuners. So it Sounds good, and plays amazing. But pickups are too hot for my (current taste) and now I find them rather muddy.

candyapple

I thougth on installing an EMG DG20 Loaded Pickguard, but although I love David Gilmour playing and sound, I don’t play like him, nor do want to sound like him, so I changed my mind about it. Besides, what’s the poing on buying the whole thing already made… where’s the fun in that?

So the plan now is to make it a killer “vintage” strat…. for a reasonable price. After doing some research I arrived to the Seymour Duncan Antiquity Texas Hot Strat set. I really like the sound of these. They are available as a set or a preloaded pickguard (but we have already established that there’s no fun in that), so the set it is. I have already ordered it and should be here within the next two weeks.

I already have a some of the required hardware (Fender SSS pickguard, actual vintage knobs)… and I’m yet to decide whether I’ll go for the classic strat setup, or go bit more custom and do away with the tone pots (either one or both), and (again) put a blower switch… as this really suits my playing. I will copper foil the guitar cavity and of course… quick disconnect features.

So I would still need the following hardware:

  • Potentiometers: Need to find out what would be ideal on a vintage strat, but more likely CTS 250K Linear will do the job for me
  • Cap: modern strats use .047pf, but apparently 0.022pf would suit this better. or I could do something like this and have the possiblity to have both.
  • Maybe another pickguard, but might need to go down the custom route as I can not fing a SSS, volume no tone pickguard

To be continued

 

Build day!

So I finally received the pickguard. Humbuckers fitted nicely, not so the CTS pot… so I had to enlarge the pot hole, and also drill a new one for the blower switch. I’ve to admit that I hesitated to drill the hole, and contemplated to use a push/pull volume, but my reasons to use a DPDT on-on were still very valid, so I ended up going on the original path and drilled the hole.

I mounted the components and it was  soldering time!… as I had pre-soldered (if that is even a word) everything, all I had to do was to solder the pickups and that was it… or so I thought…

When I went to mount the pickguard, I noticed the super switch was making contact with the side of the cavity. In fact it did not fit. so I had to flip the switch around, and re-do poles 0 by inverting the cabling so the switch would still work on the right position and right order.

I also swapped the DPDT switch for a different one which was easier to operate. Hopefully it will last the time.

IMAG0571

The completed pickguard.

IMAG0568

And this is what it looked like on the guitar. Notice the bridge saddles were also changed. I replaced the standard Fender vintage saddles with a set of Goth S21C steel saddles. I found these to be more comfortable for playing, specially as I do a lot of palm muting. The blower switch is behind the tremolo bar.

IMAG0575

The guitar with strings and intonation and action adjusted. Also note the volume know was replaced with a chrome one, as I think it looks much better.

IMAG0626

So that’s done!.. it was certainly a lot of fun…

and yes, it sounds amazing. I’ll upload some soundbytes soon.

Ah… and now I need a case and a beautiful strap

 

An update on the Locking tuners

After being unable to receive any communications from the Seller, they have agreed to a refund, and according to reverb policies they should also cover return costs. As soon as I get my money back I will be ordering from my usual eBay sellers… never had any issues with them in more than 15 years.

Reverb support was most helpful and was a different experience to chat with an actual person 🙂

Why a Partscaster? – Part I

I’ve always loved Fender Stratocasters. Ever since I can recall I’ve found it be the most beautiful guitar ever. Besides David Gilmour (praise him!) uses them.

On the same token, your Standard Fender Stratocaster, is not cheap and might or might not have the features you are looking for, and when you have paid good dollars for a Made in USA Stratocaster, it’s kind of painful to made modifications to it (at least for me).

I currently have several guitars, and have had some more over the years. Some of the other guitars have features that I certainly liked, and other guitars are so out of my reach. As time passes, I always keep coming back to the familiarity of a Strat neck and balance. They are just so nice to play.

Stratocasters are very versatile and simple instruments, and they are easily modifiable, and that makes them the ideal canvas for my next guitar.